Realty construction

Nowadays, the term industrialization in relation to construction, have long been concerns not only the urban high-rise buildings. The present boom in the construction of a country demands new approaches to the construction of houses, new materials and technologies. Speed, quality, durability and low cost – the ratio of these parameters, primarily interested in and the customer and the contractor. It is a massive demand for homes that meet these requirements, identified the popularity of technology “HEBEL”.

Technology “HEBEL” simple and effective. Crude mixture of quartz sand, lime, cement and aluminum powder, in a process similar to the preparation of dough, forming numerous bubbles, increasing in volume to 5 times. It is these pores gives the material a very attractive properties – excellent thermal insulation, light weight and ease of machining. Subsequent autoclaving at 180 degrees and a pressure of 14 bar provides excellent strength characteristics. It is this stage of the production of foam blocks are distinguished by technology “HEBEL” from other cellular concrete, foam concrete blocks or silicate and can rightfully call their artificial stone.

The spread of technology “HEBEL” You can literally be called a revolution in the construction of individual houses. The pores of the honeycomb blocks “HEBEL”, size 1 – 3 mm, provide insulation, exceeding the brickwork more than tripled. However, they have almost the same vapor-permeable, like natural wood, which is very important for the formation of a microclimate. Add to that the environmental, biological stability and fire safety, this alone would be enough to house the technology “HEBEL” widespread. But that’s not all the advantages of this material.

Due to the relatively large size aerated concrete blocks and a small proportion that does not require special lifting equipment, greatly increasing the speed of construction, reduced labor costs. The walls of the house on the technology “HEBEL” will also be relatively easy. Therefore, the foundation for the house of the blocks “HEBEL” may not be as solid and as heavy as a brick. All this reduces the overall cost of a building under.

Blocks “HEBEL” mounted using a special adhesive mass. Due to the precise geometry of the aerated concrete blocks “HEBEL”, ideally adjacent to each other. This allows for seam thickness of 2 – 4 mm. This is not only a low consumption of adhesive composition, but also the absence of “cold joints” in the joints of the blocks.

The strength of units “HEBEL” allows them to build exterior bearing walls of low-rise buildings up to 3 floors and with reinforced concrete or metal frame, with virtually no restrictions on height.

Of concrete blocks can build any configuration of the building, which opens up great possibilities for the imagination of architects. Aerated concrete blocks are usually cut from long pieces. The designer can choose any size, limited only by the capabilities of autoclave equipment. And if you need non-standard elements of complex geometry, then this is easily accomplished directly on the site. Blocks “HEBEL” can be easily processed with conventional carpentry tools. This technology is particularly useful in the construction of houses on individual projects. If you prefer, you can do without plastering work indoors, even on curved surfaces, installation flaws can be eliminated by using sander. At block “HEBEL” well glued ceramic tile, wallpaper, other finishing material.

In addition to various sizes of building blocks, the technology “HEBEL” produced a wide variety of construction materials, including all types of reinforced products – window and door lintels, floor decks and roof slab.

Country cottage built on the technology “HEBEL” – good choice!